Icstore DIY Type C TP4056 / TP 4056 / TPA4056 DC Charging, 18650 3.7v Lipo, Lithium Ion Battery Charging Module Board Kit with BMS for Portable Computer, Electronics, Car/Motorcycle – Pack of 5

Price: ₹399 - ₹199.00
(as of Oct 06, 2024 07:13:17 UTC – Details)

Features:

– Input voltage: 4.5V ~ 5.5V
– Input Interface: C-Type USB port
– Charging method: linear charge
– A full charge voltage: 4.2V
– Charge Current: 1A (default), modify the onboard resistor to adjust the charging current according to the table below.
– Charging accuracy: 1.5%
– Charging indicator: Red LED charging, Blue LED full.
– Output Reverse: lithium batteries can not be reversed.
– Over discharge Current at 4μA (Vcc= 1.8V).
– Precision Overcharge Protection Voltage 4.3V ± 50mV
– Two Detection Levels for Overcurrent Protection
– Dual channel Enhancement Mode power MOSFET : Due to the internal PMOSFET architecture and anti-reverse charging path, no external isolation diodes are required.

Specification

1. Model – C-Type
2. MaterialPCB + Alloy
   
3. Input Voltage4.5~5.5V
4. Output Voltage4.2V
5. Max. Output Current1A

MULTIPLE CHARGING METHOD: This module is made for charging rechargeable battery/batteries using the constant-current/constant-voltage (CC/CV) charging method, charging port can take power from C- USB. The input has a C- USB socket, which can be used to directly charge with the 5V mobile phone charger, and still retains the input voltage wiring solder joints, which can be very convenient DIY….Input voltage: 4.5~5.5V
MULTIPLE PROTECTION’S: This module is used for single lithium ion / lipo / 18650 cell or multiple cell in parallel, this board have overcharge, over discharge and overcurrent protection; battery over-discharge protection voltage is 2.5V, battery over current protection current is 3A
ADJUSTABLE CHARGING CURRENT: The charge current can be modeled externally with the Rprog resistor R3……Default Output is 4.12V ~ 4.2V and 1AMP ….This can be connected with other robotics project or also or this work with other modules efficiently also like custom torch, flash light , solar cells, bluetooth, testers , wireless circuit, adaptors, buzzers, powerbank, camera, temperature sensor, audio circuit / headphone amplifier, bike mobile charger, …etc.
DRIVE LOAD: Connect the battery to the B+ B-, the indicator red light is being charged and the blue light to full, OUT+ and OUT- can be connected to the load, such as the booster converter module/buck converter module or other loads.
Important: Please note that the battery terminal should be connected correctly to their respective terminal. The ammeter for testing current can only be connected in series with the 5V input terminal of the charging board. As Charging of AA, AAA and other rechargeble battery is different so, please check with battery manufacturing company manual *